DTFLINE OneTouch 15 Automatic Heat Press - 15" x 15

1 year replacement

$440.00

$498.99 SAVE 12%

DTFLINE OneTouch 15 Automatic Heat Press - 15" x 15"

The DTFLINE OneTouch 15 Automatic Heat Press delivers consistent, professional-quality transfers with simplified, hands-free operation. Designed for DTF transfers, heat transfer vinyl, sublimation, DTG curing, and other heat-applied applications, it automatically controls the pressing cycle from start to finish.

Simply load your garment onto the slide-out lower platen, select your desired temperature, time, and pressure settings-or select one of four preset modes-and press the Start button. The upper platen automatically lowers, applies the selected pressure for the programmed time, and lifts when the pressing cycle is complete.

Key Features

• Fully Automatic Pressing: The machine automatically lowers, presses, times, and releases at the end of each cycle. Simply load your item, select your settings, and press Start.
• Slide-Out Lower Platen: The bottom platen slides forward like a drawer, making it easier to load garments, position transfers, smooth fabrics, and align designs accurately. The slide-out design also allows operators to work farther away from the heated upper platen while preparing the next item.
• One-Touch Operation: Start a complete pressing cycle with the push of a single button, reducing repetitive manual effort and helping maintain consistent results from one garment to the next.
• Four Customizable Preset Modes: Save frequently used combinations of temperature, pressing time, and pressure for different transfer materials or garments. Presets help reduce setup time and minimize operator errors during repeat production.
• Four Pressure Levels: Select from four pressure settings to accommodate different garment thicknesses, transfer materials, and application requirements.
• Large 15" x 15" Platen: The full-size pressing area accommodates T-shirts, sweatshirts, tote bags, pillowcases, large graphics, and many other flat heat-transfer applications.
• Consistent Heat and Pressure: Controlled temperature, pressure, and dwell time help produce dependable adhesion and repeatable transfer results across production runs.
• Intuitive Control Interface: Easily adjust temperature, time, pressure, and preset settings from the machine's user-friendly control panel.
• Emergency Stop Button: A clearly accessible emergency shut-off control allows the operator to immediately stop the machine when necessary.
• Reduced Operator Fatigue: Automatic lowering and lifting eliminate the repeated pulling and pushing required with traditional clamshell or swing-away heat presses.

Technical Specifications

• Platen Size: 15" x 15" (381 x 381 mm)
• Lower Platen: Slide-out drawer design
• Pressure Settings: 4 selectable levels
• Approximate Pressure Range: 60-180 kg
• Temperature Range: Approximately 40-210°C (104-410°F)
• Timer Range: 1-999 seconds
• Presets: 4 user-customizable operating modes
• Operation: Automatic press, timing, release, and lift
• Control: Manual settings or saved presets
• Compatible Applications: DTF, HTV, sublimation, DTG post-pressing, transfer paper, and other heat-applied graphics

Ideal Applications

• Direct-to-film transfers
• Heat transfer vinyl
• Sublimation transfers
• DTG pretreatment drying and post-curing
• Printed transfer papers
• T-shirts and sweatshirts
• Tote bags and fabric panels
• Pillowcases and other flat textile products

Typical Workflow

1. Slide the lower platen forward.
2. Load the garment or substrate and smooth the pressing area.
3. Position the transfer in the desired location.
4. Slide the lower platen back into the pressing position.
5. Select a saved preset or manually set the temperature, time, and pressure.
6. Press the one-touch Start button.
7. The upper platen automatically lowers and applies the selected heat and pressure.
8. When the programmed time is complete, the press automatically releases and lifts.
9. Slide the lower platen forward and remove or peel the transfer as directed by the transfer manufacturer.

What's Included

• DTFLINE OneTouch 15 Automatic Heat Press with 15" x 15" platen
• Power cable
• Quick Start and Safety Guide

Built for Consistent Production

The DTFLINE OneTouch 15 is an excellent choice for apparel decorators, print shops, fulfillment operations, schools, startups, and event-merchandise businesses that need dependable results without the physical effort of a traditional manual press.

Its automatic pressing cycle, customizable presets, and slide-out lower platen help improve workflow, simplify operator training, and maintain consistent transfer quality across short runs and ongoing production.

Item #: ONETOUCH-HEATPRESS-15X15