xTool SafetyPro AP2 Max Air Purifier with SuperCyclone

1 year replacement

$2,349.00

$2,598.99 SAVE 10%

xTool SafetyPro™ AP2 Max Air Purifier with SuperCyclone System

Powerful fume, dust & odor filtration built for demanding workflows-keep your apparel printing, DTF powdering, and workspace clean and safe.

Available Options:

SafetyPro AP2 Air Purifier	SafetyPro AP2 Filters	SafetyPro AP2 Max Air Purifier	SafetyPro AP2 Max Filters
DTF or Desktop-Grade Laser Purification For xTool DTF and desktop lasers (S1, P2, D1, F1) 150 m³/h airflow 6-layer filtration system 36 cyclone particle separators Removes smoke and VOC fumes Quiet desktop operation (55 dB)	6-stage filtration, 5 replaceable filters 1 x Pre-filter 1 x Medium-efficiency filter 1 x Activated carbon filter 1 x Carbon mesh filter 1 x High-efficiency HEPA filter	Industrial-Grade Purification For xTool P3, F2 Ultra & large lasers (also great for DTF) 700 m³/h Airflow 7-Layer filtration system 72 Cyclones Removes smoke and VOC fumes Quiet desktop operation (65 dB) 4x Higher Dust Capacity Filters	7-stage filtration, 6 replaceable filters 1 x Pre-filter 1 x Medium-efficiency filter 1 x Activated carbon filter 1 x Ultra-Dense Carbon Mesh Filter 1 x KM Formaldehyde Filter 1 x High-Efficiency (HEPA) Filter
$999.00 view item	$30.00 view item	$2,349.00	$89.00 view item

Key Features

• SuperCyclone Separation: Centrifugal pre-filtering that captures large particles before they reach the main filters-extending filter life up to 10x.
• Multi-Layer Filtration: 7-layer system (depending on version) removes fine dust (0.3 µm), PM2.5, VOCs, toluene and odors down to 99.97% + efficiency.
• High Airflow Capacity: 700 m³/h for robust workshops.
• Quiet & Smart Operation: Operates around 65 dB, has auto-on/off features, syncs with supported machines and material types for optimized performance.
• Workshop-Ready Design: Includes wheels, magnetic filter door for quick changes, and hose port for exhaust or internal recirculation setups.

Specifications

• Filtration Layers: 7
• Airflow Rating: Up to ~700 m³/h
• Noise Level: ~65 dB (quiet operation)
• Control Modes: Touch button panel, 1-100% speed settings, optional wireless dongle for sync.

Why It Works for Your Apparel/DTF Setup

When operating a DTF apparel printing line (film printing, powder application, curing, pressing), you generate fine particulate dust (adhesive powder), inks and possible off-gassing from substrates and adhesives. The SafetyPro AP2 helps:

• Maintain clean air free from powder haze-protecting operators, machinery optics and air quality.
• Reduce sticky film path contamination by capturing overspray and airborne particles before they settle.
• Ensure safer workspace compliance and better ventilation support, especially in indoor studios or shared spaces.

Installation & Setup Tips

1. Place the AP2 near your powder or curing station to capture air before it disperses into the room.
2. Connect exhaust hose if required-either vent to outside or recirculate filtered air indoors depending on local code.
3. Turn on auto-mode if your printer supports synced operation-this suspends AP2 operation when machine is idle, saving runtime and filter life.
4. Monitor filter status via panel or app; clean the cyclone pre-filter regularly for best performance.

Item #: XT-AP2MAX-PURIFIER